UK Karting - Notice Board (Combined Forum) : Re: clutch bolt !!!

Notice Board (Combined Forum)

Re: clutch bolt !!!
Posted by 'JimG' on 21 Apr 2016 @ 14:09

| View Message Thread | Reply to this message |

JimGJoined: April 2003
Total Posts: 7
[ View User Profile ]

Hope this might help with your issue.

When I was competing in Prokarts, I made up special washers that went onto the crank before sliding on the clutch.

These were made with a "transition fit" on the crank diameter and with a radius machined on the inner face that matched the one that is ground into the crank. This meant that the clutch bolt could be done up tightly without any fear of the inner race of the clutch opening up.

I also made up special "thick" outer washers and was able to wire the cap head clutch securing bolt to the washer to prevent it falling out.

Message Thread:

clutch bolt !!! by 'pmondo' (16 Apr 2016 @ 11:46)

Re: clutch bolt !!! by 'd-i-y71' (16 Apr 2016 @ 13:02)

Re: clutch bolt !!! by 'Knighty' (16 Apr 2016 @ 19:35)

Re: clutch bolt !!! by 'pmondo' (17 Apr 2016 @ 6:43)

Re: clutch bolt !!! by 'JimG' << You are here!

Re: clutch bolt !!! by 'Mark 71' (21 Apr 2016 @ 17:12)

Re: clutch bolt !!! by 'JimG' (22 Apr 2016 @ 8:34)

Re: clutch bolt !!! by 'd-i-y71' (22 Apr 2016 @ 8:46)

Re: clutch bolt !!! by 'JimG' (22 Apr 2016 @ 10:33)

Re: clutch bolt !!! by 'd-i-y71' (22 Apr 2016 @ 14:29)

Re: clutch bolt !!! by 'JimG' (25 Apr 2016 @ 8:16)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links