UK Karting - Notice Board (Combined Forum) : Re: nose fairing mounting kit workarounds

Notice Board (Combined Forum)

Re: nose fairing mounting kit workarounds
Posted by 'IamSpartacus' on 20 Dec 2015 @ 11:18

| View Message Thread | Reply to this message |

IamSpartacusJoined: July 2009
Total Posts: 31
[ View User Profile ]

As long as not a prohibited material (e.g. titanium) there are no constraints on material used for ballast.

My proposed mounting scheme here is on the bumper protruding forwards, not on the front edge of the chassis.

I have measured an 80mm gap between the lower bumper and dront edge of chassis tubing. As long as the rear facing section of the ballast mount is under 40mm there is plenty of clearance for the 40mm forbidden zone.

Message Thread:

nose fairing mounting kit workarounds by 'IamSpartacus' (19 Dec 2015 @ 12:34)

Re: nose fairing mounting kit workarounds by 'richydehav' (19 Dec 2015 @ 20:05)

Re: nose fairing mounting kit workarounds by 'bt3962' (20 Dec 2015 @ 4:43)

Re: nose fairing mounting kit workarounds by 'IamSpartacus' << You are here!

Re: nose fairing mounting kit workarounds by 'IamSpartacus' (21 Dec 2015 @ 8:18)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links