UK Karting - Notice Board (Combined Forum) : Re: losing wheels at kart race meetings.

Notice Board (Combined Forum)

Re: losing wheels at kart race meetings.
Posted by 'd-i-y71' on 15 Oct 2014 @ 14:03

| View Message Thread | Reply to this message |

d-i-y71Joined: September 2009
Total Posts: 198
[ View User Profile ]

As stated elsewhere I have never had a 50 mm axle and consider them inferior to the 40 or 30mm in many respects. I have run a 40mm axle and machined the outer section of the hubs to allow the axle and rim to slide through to give desirable rear track adjustment not possible with a 50 mm setup. I have always used tubular sleeves on all axles to prevent inward movement of the hub, movement of the axle , and to use the bearing grub screws as intended ie to prevent the inner bearing race rotating on the axle , not to resist the high lateral loadings in cornering. Given that with a standard 50 mm axle and unmodified hubs it is possible to use a standard Nyloc and washer why use k nuts? . Given that a 17mm stub resulted in more bending of the kingpin cf the 15mm. The much longer 25mm stub must worsen this situation even with a 10 mm pin.However we are talking about failures resulting in parts becoming separated from the kart. None of the drawbacks you have listed for the smaller dia axle, all easily remedied resulted in such a failure. You say the 50mm axle is 'stronger'. In what way? It would seem that the normal point of failure is around drillings for a key inboard of the inner axle bearing? Not needed on most karts. Vast majority have not failed yet!

Message Thread:

Loosing wheels at MSA meetings by 'goman' (14 Oct 2014 @ 10:35)

Re: Loosing wheels at MSA meetings by 'Aquila' (14 Oct 2014 @ 11:58)

Re: Loosing wheels at MSA meetings by 'alanrr' (14 Oct 2014 @ 12:02)

Re: Loosing wheels at MSA meetings by 'goman' (14 Oct 2014 @ 13:14)

Re: Loosing wheels at MSA meetings by 'Aquila' (14 Oct 2014 @ 13:22)

Re: Loosing wheels at MSA meetings by 'raceinstructor' (14 Oct 2014 @ 15:38)

losing wheels at kart race meetings. by 'd-i-y71' (14 Oct 2014 @ 22:02)

Re: losing wheels at kart race meetings. by 'richydehav' (15 Oct 2014 @ 0:01)

Richy, perhaps he hit the B instead of the W :) nt by 'alanrr' (15 Oct 2014 @ 0:24)

Re: Richy, perhaps he hit the B instead of the W : by 'd-i-y71' (15 Oct 2014 @ 10:00)

Re: Richy, perhaps he hit the B instead of the W : by 'alanrr' (15 Oct 2014 @ 10:37)

Re: Positive moves from the committees by 'iant' (15 Oct 2014 @ 13:50)

No idea where that thread title came from !!! (nt) by 'iant' (15 Oct 2014 @ 19:03)

Re: Richy, perhaps he hit the B instead of the W : by 'SimonS' (15 Oct 2014 @ 19:37)

Re: losing wheels at kart race meetings. by 'SimonS' (15 Oct 2014 @ 12:19)

Re: losing wheels at kart race meetings. by 'd-i-y71' << You are here!

Re: Loosing wheels at MSA meetings by 'alanrr' (14 Oct 2014 @ 16:15)

Re: Loosing wheels at MSA meetings by 'BanzaiBoy' (14 Oct 2014 @ 17:51)

Re: Loosing wheels at MSA meetings by 'SimonS' (14 Oct 2014 @ 20:14)

Re: Loosing wheels at MSA meetings by 'ComfortablyNumb' (14 Oct 2014 @ 20:47)

Re: Loosing wheels at MSA meetings by 'Aquila' (14 Oct 2014 @ 21:23)

Re: Loosing wheels at MSA meetings by 'alanrr' (14 Oct 2014 @ 22:52)

Re: Loosing wheels at MSA meetings by 'John' (15 Oct 2014 @ 7:57)

Re: Loosing wheels at MSA meetings by 'alanrr' (15 Oct 2014 @ 10:24)

Re: Loosing wheels at MSA meetings by 'ComfortablyNumb' (15 Oct 2014 @ 11:49)

Re: Loosing wheels at MSA meetings by 'BanzaiBoy' (15 Oct 2014 @ 12:29)

Re: Loosing wheels at MSA meetings by 'John' (15 Oct 2014 @ 13:25)

Re: Loosing wheels at MSA meetings by 'd-i-y71' (15 Oct 2014 @ 14:25)

Re: Loosing wheels at MSA meetings by 'Liam' (15 Oct 2014 @ 15:58)

Re: Loosing wheels at MSA meetings by 'MaxRacewear' (15 Oct 2014 @ 22:24)

Re: Loosing wheels at MSA meetings by 'MaxRacewear' (15 Oct 2014 @ 22:26)

Re: Loosing wheels at MSA meetings by 'Liam' (16 Oct 2014 @ 10:55)

Re: Loosing wheels at MSA meetings by 'John' (16 Oct 2014 @ 14:41)

Re: Loosing wheels at MSA meetings by 'MaxRacewear' (16 Oct 2014 @ 16:22)

Re: Loosing wheels at MSA meetings by 'alanrr' (16 Oct 2014 @ 22:24)

Re: Loosing wheels at MSA meetings by 'SimonS' (16 Oct 2014 @ 22:22)

Re: Loosing wheels at MSA meetings by 'alanrr' (16 Oct 2014 @ 22:39)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links