UK Karting - Notice Board (4-Stroke Karting) : Re: Carb AFR

Notice Board (4-Stroke Karting)

Re: Carb AFR - Screw tab
Posted by 'lard ass bob' on 22 Feb 2011 @ 18:28

| View Message Thread | Reply to this message |

lard ass bobJoined: August 2001
Total Posts: 41
[ View User Profile ]

I would be inclined to remove the tab - you just can't be sure that it is in the correct place and it also means you can clean it easier. I used a dremill but I dare say a junior hacksaw would work.

Setting is around 2 - 2&1/2 turns out from closed. With the engine running at fast idle (say 2,500 revs) wind in then back out. You will hear the revs pick up noticeably around 2 - 2&1/2 turns from fully closed. Peak revs is the optimal point for the setting. (Fully in the engine may stall so be quick at winding it back out again).

Graeme

Message Thread:

Carb AFR - Screw tab by 'MJK' (22 Feb 2011 @ 10:23)

Re: Carb AFR - Screw tab by 'lard ass bob' << You are here!

Re: Carb AFR - Screw tab by 'MJK' (26 Feb 2011 @ 22:44)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links