UK Karting - Notice Board (2-Stroke Karting) : alternatively

Notice Board (2-Stroke Karting)

alternatively
Posted by 'TheMantis' on 01 Mar 2011 @ 18:58

| View Message Thread | Reply to this message |

TheMantisJoined: May 2002
Total Posts: 1
[ View User Profile ]

secure the stub axle tightly in a vice with a length of cloth round the outside to stop damage.

slide a 5/6mm t bar allen key down through the top bearing, a couple of taps with a hammer will remove the lower bearing.

Then flip and repeat.

To insert the new bearing open the vice with enough gap for the stub and a bearing and use the vice to push the new bearing into the stub. It applies even pressure around the outer race of the bearing and pushes it smoothly into the stub.

If your chassis is really old i would go for Aquila's method, newer chassis either way is ok

Message Thread:

How to remove a bearing from the stub axel by 'haltham' (01 Mar 2011 @ 18:35)

Re: How to remove a bearing from the stub axel by 'Aquila' (01 Mar 2011 @ 18:39)

Re: How to remove a bearing from the stub axel by 'haltham' (01 Mar 2011 @ 18:56)

Re: How to remove a bearing from the stub axel by 'Aquila' (01 Mar 2011 @ 18:58)

alternatively by 'TheMantis' << You are here!

Re: alternatively by 'haltham' (02 Mar 2011 @ 10:43)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links