UK Karting - Notice Board (2-Stroke Karting) : Re: Rotax MAx ingintion issue..

Notice Board (2-Stroke Karting)

Re: Rotax MAx ingintion issue..
Posted by 'AlfieMoon' on 29 Oct 2010 @ 12:03

| View Message Thread | Reply to this message |

AlfieMoonJoined: October 2003
Total Posts: 2
[ View User Profile ]

The lead can be replaced and that is what I would recommend that you do. The fact that it is still working is down to luck. When you pulled it out of its socket you would have damaged the carbon conductors in the end of the lead and the spark is probably jumping the gap at the moment. Buy a length of lead from a motor factor or kart shop. You can unscrew the old piece from the plug cap and fit the new length of lead by just screwing it into the coil and plug cap. do not over tighten as this will damage the core and you will be back to square one. People have been shortening ht leads in the belief that the spark arrives at the plug gap more quickly. Given the phenomenal speed of light and electricity, you have to wonder what planet they are on.

Message Thread:

Rotax MAx ingintion issue.. by 'ac1962' (28 Oct 2010 @ 21:04)

Re: Rotax MAx ingintion issue.. by 'Ditch' (29 Oct 2010 @ 5:09)

Re: Rotax MAx ingintion issue.. by 'AlfieMoon' << You are here!

Re: Rotax MAx ingintion issue.. by 'dave56' (30 Oct 2010 @ 18:47)

It is already too short, according to him. NT by 'AlfieMoon' (30 Oct 2010 @ 20:35)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links