UK Karting - Notice Board (2-Stroke Karting) : Whilton mill and rowrah S1 and grease

Notice Board (2-Stroke Karting)

Whilton mill and rowrah S1 and grease
Posted by 'David1974' on 06 May 2009 @ 07:49

| View Message Thread | Reply to this message |

David1974Joined: March 2009
Total Posts: 1
[ View User Profile ]

whilst the clutches of the top 10 were changed in the pre final, grease WAS allowed on the bearing as people were in there with pots of grease AND asked the scruts if that was ok and it was, however as a friend pointed out, ONLY these top ten had their clutch marked so if a change was needed they had to go back to the scruts and do it there, ANYONE who was NOT in the top ten didnt get it marked which meant (as some did) if they got into the top ten for the final they were free to do what they wanted LOOPHOLE !!!!!!
so rowrah, ALL drivers had there clutch stripped AND the scruts placed grease on the bearing and marked the nut so if you needed to chane the front sprocket etc you had to go back to the scrut which i think was a fair and proper way to police the situation.
the 3000rpm test was brought in for the old clutch NOT the new one and as people will tell you the NEW CLUTCH SLIPS WHEN NEW AND COLD normally so a bit of dodgy ground there? jag/rotax are at fault for not thoroughly testing all possibilites here, not the drivers, mechanics or scruts ! lets remember that

Message Thread:

slippy clutches by 'lardass' (04 May 2009 @ 21:31)

Yawn............. by 'David1974' (04 May 2009 @ 22:09)

Re: Yawn............. by 'lardass' (04 May 2009 @ 22:11)

grease is legal by 'David1974' (04 May 2009 @ 22:14)

here you go by 'David1974' (04 May 2009 @ 22:18)

Re: here you go by 'lardass' (04 May 2009 @ 22:33)

Re: grease is legal by 'lardass' (04 May 2009 @ 22:24)

www.abkc.org.uk by 'David1974' (04 May 2009 @ 22:30)

Re: www.abkc.org.uk by 'lardass' (04 May 2009 @ 22:36)

Read the part about 3000rpm max .. by 'Chad' (05 May 2009 @ 1:14)

Re: Read the part about 3000rpm max .. by 'lardass' (05 May 2009 @ 5:20)

BRP Rotax is a long way to.... by 'David1974' (05 May 2009 @ 7:49)

Re: BRP Rotax is a long way to.... by 'alanrr' (05 May 2009 @ 10:37)

Re: BRP Rotax is a long way to.... by 'John' (05 May 2009 @ 11:38)

The Loctite was also one of my..... by 'alanrr' (05 May 2009 @ 11:50)

Re: The Loctite was also one of my..... by 'John' (05 May 2009 @ 12:02)

The simple solution is to .... by 'Chad' (05 May 2009 @ 14:55)

Re: The simple solution is to .... by 'John' (05 May 2009 @ 15:05)

Re: The simple solution is to .... by 'DanTheK1RaceGearMan' (05 May 2009 @ 23:37)

Re: The simple solution is to .... by 'Avago' (05 May 2009 @ 22:52)

WHY only the top finishers? WHY not all?.... by 'Chad' (06 May 2009 @ 1:38)

Re: WHY only the top finishers? WHY not all?.... by 'Avago' (06 May 2009 @ 6:38)

Whilton mill and rowrah S1 and grease by 'David1974' << You are here!

Re: Whilton mill and rowrah S1 and grease by 'Invader' (06 May 2009 @ 9:16)

Oh great! by 'alanrr' (06 May 2009 @ 10:39)

Re: Oh great! by 'DanTheK1RaceGearMan' (09 May 2009 @ 23:30)

Just do the freakin rpm check ! .. by 'Chad' (06 May 2009 @ 11:49)

Re: Just do the freakin rpm check ! .. by 'RobertR' (06 May 2009 @ 12:44)

Re: Just do the freakin rpm check ! .. by 'bigp' (06 May 2009 @ 13:33)

ROTAX take responsibility by 'RobertR' (06 May 2009 @ 15:12)

Re: ROTAX take responsibility by 'bigp' (06 May 2009 @ 16:12)

Re: Whilton mill and rowrah S1 and grease by 'Varneytec' (06 May 2009 @ 13:42)

Re: Whilton mill and rowrah S1 and grease by 'Invader' (06 May 2009 @ 14:47)

Bad bit of kit or not?. by 'bigp' (06 May 2009 @ 16:27)

Re: Stop talking Crap! by 'John' (06 May 2009 @ 16:56)

Re: Stop talking Crap! by 'bigp' (06 May 2009 @ 17:17)

Re: Stop talking Crap! by 'Invader' (06 May 2009 @ 17:20)

Re: Stop talking Crap! by 'John' (06 May 2009 @ 17:42)

Re: Stop talking Crap! by 'JonWright' (06 May 2009 @ 18:29)

Re: Stop talking Crap! by 'John' (06 May 2009 @ 18:43)

doesnt anyone know how to do a stall test .. by 'Chad' (07 May 2009 @ 1:52)

Lard Ass by 'lard ass bob' (06 May 2009 @ 17:24)

why not debate how much faster the new 09 junior by 'David1974' (06 May 2009 @ 19:11)

Re: why not debate how much faster the new 09 juni by 'gettingquicker' (06 May 2009 @ 20:45)

Re: why not ..start a new thread..? (nt) by 'Chad' (07 May 2009 @ 1:55)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links