UK Karting - Notice Board (2-Stroke Karting) : Re: Carb pin size

Notice Board (2-Stroke Karting)

Re: Carb pin size
Posted by 'alanrr' on 24 Aug 2015 @ 00:35

| View Message Thread | Reply to this message |

alanrrJoined: August 2001
Total Posts: 491
[ View User Profile ]

The profiles are different.

The k27 is thinner on its lower part and will run richer up to 3/4 throttle.

The k98 is much fatter on its lower part and will run leaner, especially in the first part of the throttle opening after 1/4 throttle.

The main jet doesn't really play much part in the 1/4 to 3/4 throttle opening, the needle controls the fuel delivery, so you could remove the main jet and the carb would perform normally up until the 3/4 to full throttle point when the open tube would pass too much fuel.

By raising or lowering the needle position with the circlip, you will alter the fuel/air mixture at particular throttle openings.

Message Thread:

Carb pin size by 'Budge1987' (23 Aug 2015 @ 18:45)

Re: Carb pin size by 'alanrr' << You are here!

Re: Carb pin size by 'itpro' (24 Aug 2015 @ 1:37)

Re: Carb pin size by 'alanrr' (24 Aug 2015 @ 9:20)

Re: Carb pin size by 'Budge1987' (24 Aug 2015 @ 20:53)

Re: Carb pin size by 'alanrr' (25 Aug 2015 @ 23:24)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links