UK Karting

Notice Board (2-Stroke Karting)




Re: Hubs slipping
Posted by 'bodger' on 22 Nov 2010 @ 19:32


| View Message Thread | Reply to this message |
bodger
Joined: November 2010
Total Posts: 2
[ View User Profile ]
Here is a fix. Look at the slot down the length of the hub. You will see that the slot is deeper on the outer part of the hub compared to the i/d. This is due to the slot being cut with a circular milling cutter thus leaving extra metal on the inside. This extra presents resistance to the clamping effect when the pinch bolt is tightened. The fix is simple.
Use a padsaw hacksaw blade and cut down through this extra metal until it is level with the outside slot position.
You should then dress up the slot with a flat thin file.
This will allow the hub to clamp down easier and present extra hub to axle face contact.
Another tip - take the pinch bolt out of the hub and using a hacksaw, cut a central screwdriver slot into the end about 1mm deep. Now if you overtighten the pinch bolt and shear off the head, you can unscrew the sheared thread back out through the entry using a screwdriver.
If you round off the hex hole and cannot undo an overtightened pinch bolt, then same process but you will either have to first drill off the cap head or use a thin angle grinder disc to cut through the bolt in the slot.

Message Thread:

Hubs slipping  by 'Mikekart95'   (18 Nov 2010 @ 10:08)
Re: Hubs slipping  by 'davidmc'   (18 Nov 2010 @ 10:23)
Re: Hubs slipping  by 'SammyB'   (18 Nov 2010 @ 10:35)
Re: Hubs slipping  by 'alanrr'   (18 Nov 2010 @ 11:36)
Re: Hubs slipping  by 'SAS'   (18 Nov 2010 @ 12:17)
Re: Hubs slipping  by 'Mikekart95'   (19 Nov 2010 @ 9:03)
Re: Hubs slipping  by 'tkmracer9'   (20 Nov 2010 @ 21:02)
Re: Hubs slipping  by 'TeamOrange'   (20 Nov 2010 @ 22:17)
Re: Hubs slipping  by 'buzzinrussell'   (20 Nov 2010 @ 23:27)
Re: Hubs slipping  by 'Ben86'   (21 Nov 2010 @ 16:32)
Re: Hubs slipping  by 'bodger'  << You are here!

Post a Reply:
You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form.
Reply To "Re: Hubs slipping"
Email Address :   Not Registered? Click Here to register...
Password :   Passwords are Case Sensitive!   [ Password Lookup ]
Message Title / Subject :
Message :
Options : Subscribe to this thread?   [ More Information ]

Top of Page
Notice Board Index

[ UK Karting Main Index ]


News Karts and Karting Notice Board Market Place Companies Directory Tracks Directory Events Calendar Race Results Photo Gallery Links
News Karts &
Karting
Notice
Board
Market
Place
Companies
Directory
Tracks
Directory
Events
Calendar
Race
Results
Photo
Gallery
Links

UK Karting

Copyright © 1996-2018 UK Karting
Comments, Suggestions etc. mail@karting.co.uk