dave56 just to clarify, the ruling on mounting the coil is, (taken from MSA regs) The ignition coil must have three pin connection. The ignition coil must be mounted by means of two original rubber mounting blocks or equivalent to the gearbox cover. In the case of chassis component interference with the original mounting position it is permitted to relocate the ignition coil by the use of an extension bracket. The extension bracket must be attached to the original gearbox cover mounting holes. The ignition coil must be mounted by means of two original rubber mounting blocks or equivalent.
No need for the 21 day rule it has been there all along, at least this year anyway. Paul
|
|