UK Karting - Notice Board (2-Stroke Karting) : Re: BT82 end float

Notice Board (2-Stroke Karting)

Re: BT82 end float
Posted by 'Traxtar' on 19 Feb 2009 @ 19:00

| View Message Thread | Reply to this message |

TraxtarJoined: January 2005
Total Posts: 1
[ View User Profile ]

Well you set up the end float with the spacers/shims you put behind the main bearings.

If your replacing the main bearings just put back the shims you find if any.. obviously if you have loads of side side movmnt then you will need to mesure it with a feeler gauge between the crank and the crankcase & put afew more shims in behind the New bearing.

If you have loads of up & down movmnt which is common with tkm motors then your crank shaft journals are badly worn.

Message Thread:

BT82 end float by 'DavidRocke' (19 Feb 2009 @ 18:25)

Re: BT82 end float by 'Traxtar' << You are here!

Re: BT82 end float by 'DavidRocke' (19 Feb 2009 @ 19:37)

Re: BT82 end float by 'iant' (20 Feb 2009 @ 12:28)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links