UK Karting - Notice Board (2-Stroke Karting) : Re: hewland arrow rotary valve setup

Notice Board (2-Stroke Karting)

Re: hewland arrow rotary valve setup
Posted by 'QuickOldTimer' on 25 Dec 2008 @ 19:34

| View Message Thread | Reply to this message |

QuickOldTimerJoined: April 2005
Total Posts: 1
[ View User Profile ]

To reposition the Rotary Valve you will first need to remove the sprocket and valve cover. The rotary valve is on a triangular hub, and has 6 possible positions. First of all you need to get it the correct way round. Any writing will be on the inner face of the valve/the worst of the circular scratch marks on the outer face. Turn the crankshaft until the piston is at top dead centre, and fit the valve to the hub such that the edge of the valve is just starting to close the inlet port (rotation being clockwise as your looking at it), and has fully closed it at about 80degrees of crankshaft rotation after TDC. Continuing to rotate it should result in the inlet port just starting to crack open at about 45degrees after bottom dead centre. Then just refit the valve cover plate and sprocket.

Message Thread:

hewland arrow rotary valve setup by 'westie' (25 Dec 2008 @ 15:03)

Re: hewland arrow rotary valve setup by 'QuickOldTimer' << You are here!

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links