UK Karting - Notice Board (2-Stroke Karting) : Re: ITPRO

Notice Board (2-Stroke Karting)

Re: ITPRO - your reply.
Posted by 'BigJohn' on 20 Oct 2008 @ 18:48

| View Message Thread | Reply to this message |

BigJohnJoined: May 2002
Total Posts: 1
[ View User Profile ]

Hi

It sounds to me that the most likely is that the carb was not seated properly when you refitted it. This could let it suck air which would let it rev away. After you killed it and restarted this shaking could have provided a temporary cure by re-sealing the carb and curing the air leak.

On the track is a bit harder to explain but could be due to the air leak being large enough to totally screw the mixture, or, as Ian said, maybe a simple linkage problem when you reassembled.

I have actually heard of a TKM reving away with NO carb fitted when turned over on the starter! Presumably there was enough vapour in the crank to get it going.

My advice would be to rebuild the carb and reassemble everything with fresh gaskets, thoroughly check the throttle linkage and return springs etc and then let us know how you get on

Message Thread:

Tilly problems - loss of pick after rebuild?????? by 'quercus' (20 Oct 2008 @ 7:12)

Tilly problems - loss of pick up after rebuild? by 'quercus' (20 Oct 2008 @ 11:36)

Re: Tilly problems - loss of pick after rebuild??? by 'itpro' (20 Oct 2008 @ 12:47)

ITPRO - your reply. by 'quercus' (20 Oct 2008 @ 16:04)

Re: ITPRO - your reply. by 'BigJohn' << You are here!

Re: ITPRO - your reply. by 'itpro' (20 Oct 2008 @ 19:11)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links