UK Karting - Notice Board (General Karting) : Lifting inside wheel

Notice Board (General Karting)

Lifting inside wheel - beginner's guide
Posted by 'RedDragonRacing' on 15 Aug 2012 @ 10:17

| View Message Thread | Reply to this message |

RedDragonRacingJoined: August 2012
Total Posts: 1
[ View User Profile ]

This is our first season in karting and both the drivers and the mechanic are trying to figure out the basics. I've made a list of parameters that should help lifting the inside wheel. Please have a look and check for mistakes/misunderstandings:

Rims - Harder rims provide more leverage, aluminium rims are harder than magnesium.

Axle - Harder axle provides more leverage

Rear hubs - Wider rear hubs makes the axle bend less, providing more leverage

Rear track - Narrow track makes the kart tip over more easily

Crash bar, rear - Makes the frame stiffer, providing more leverage

Crash bar, front - Makes the frame stiffer, providing more leverage

Torsion bar, rear - Makes the frame stiffer, providing more leverage

Torsion bar, front - Makes the frame stiffer, providing more leverage

Caster - Maximum positive caster creates a larger heigth difference between the inner and outer front wheels, making the kart tip over more easily

Height front - More ride height up front provides more of a weigth shift between the front wheels (too much will move the CoG too far back, reducing wheel lift)

Height rear - More ride height in the rear provides more of a weigth shift between the rear wheels

Camber - Positive camber creates a larger heigth difference between the inner and outer front wheels, making the kart tip over more easily

Spacers, front - More spacers on the front/stub axles creates a larger heigth difference between the inner and outer front wheels, making the kart tip over more easily

Seat - A higher mounting position for the seat will provide more of a weigth shift. Moving the seat rearwards will move the CoG rearwards and decrease wheel lift? (Or make the kart tip over more easily?)

Weigths - Weigths mounted higher up on the seat will increase the weigth shift

Seat stays - Seat stays will push down on the rear axle's outside bearing and lift the rear axle's inside bearing

Axle center bearing - A bolted down (as opposed to loose) center bearing on the rear axle will make the rear axle bend less, making it stiffer and provide more leverage

Side pods - With the side pods tigthened, the frame will be stiffer, providing more leverage

Rear bumper - With the rear bumper tigthened, the frame will be stiffer, providing more leverage

Floor tray - With the floor tray tigthened, the frame will be stiffer, providing more leverage

Steering axle spade - With the tie rods mounted further away (more offset) from the steering axle on the steering axle spade, the inner front wheel will turn more creating more leverage?

Message Thread:

Lifting inside wheel - beginner's guide by 'RedDragonRacing' << You are here!

Re: Lifting inside wheel - beginner's guide by 'd-i-y71' (15 Aug 2012 @ 14:35)

Re: Lifting inside wheel - beginner's guide by 'Traxtar' (15 Aug 2012 @ 16:08)

Re: Lifting inside wheel - beginner's guide by 'Brasic' (15 Aug 2012 @ 22:43)

Re: Lifting inside wheel - beginner's guide by 'buzzinrussell' (15 Aug 2012 @ 23:11)

Re: Lifting inside wheel - beginner's guide by 'RedDragonRacing' (16 Aug 2012 @ 12:37)

Re: Lifting inside wheel - beginner's guide by 'Chris34' (16 Aug 2012 @ 15:38)

Re: Lifting inside wheel - beginner's guide by 'BFD' (16 Aug 2012 @ 17:46)

Re: Lifting inside wheel - beginner's guide by 'michaelg36' (16 Aug 2012 @ 23:34)

Re: Lifting inside wheel - beginner's guide by 'BFD' (17 Aug 2012 @ 6:51)

Re: Lifting inside wheel - beginner's guide by 'RedDragonRacing' (17 Aug 2012 @ 7:59)

Re: Lifting inside wheel - beginner's guide by 'PoppaAl' (17 Aug 2012 @ 9:09)

Re: Lifting inside wheel - beginner's guide by 'Thebrick' (17 Aug 2012 @ 10:26)

Re: Lifting inside wheel - beginner's guide by 'Danlee' (17 Aug 2012 @ 11:31)

Re: Lifting inside wheel - beginner's guide by 'Chris34' (17 Aug 2012 @ 12:32)

Re: Lifting inside wheel - beginner's guide by 'Traxtar' (17 Aug 2012 @ 12:53)

Re: Lifting inside wheel - beginner's guide by 'd-i-y71' (17 Aug 2012 @ 13:02)

Re: Lifting inside wheel - beginner's guide by 'RedDragonRacing' (17 Aug 2012 @ 13:10)

Re: Lifting inside wheel - beginner's guide by 'RedDragonRacing' (17 Aug 2012 @ 13:35)

Re: Lifting inside wheel - beginner's guide by 'd-i-y71' (17 Aug 2012 @ 13:53)

Errrr...... well...... by 'itpro' (17 Aug 2012 @ 13:04)

Re: Errrr...... well...... by 'RedDragonRacing' (17 Aug 2012 @ 13:25)

Re: Errrr...... well...... by 'michaelg36' (17 Aug 2012 @ 13:53)

Re: Errrr...... well...... by 'BFD' (17 Aug 2012 @ 14:24)

Re: Errrr...... well...... by 'itpro' (17 Aug 2012 @ 14:41)

Re: Errrr...... well...... by 'itpro' (17 Aug 2012 @ 14:52)

Re: Errrr...... well...... by 'RedDragonRacing' (17 Aug 2012 @ 20:35)

Re: Errrr...... well...... by 'BFD' (17 Aug 2012 @ 21:05)

Red... by 'itpro' (18 Aug 2012 @ 0:57)

Re: Errrr...... well...... by 'RedDragonRacing' (20 Aug 2012 @ 9:50)

Re: BFD by 'Attack2001' (18 Aug 2012 @ 2:11)

Re: BFD by 'BFD' (18 Aug 2012 @ 18:55)

Re: BFD by 'Aquila' (19 Aug 2012 @ 22:01)

Re: BFD by 'BFD' (19 Aug 2012 @ 22:38)

Re: BFD by 'BFD' (19 Aug 2012 @ 23:27)

Come on BFD.......... by 'itpro' (21 Aug 2012 @ 0:05)

Re: BFD by 'Aquila' (20 Aug 2012 @ 10:30)

Red.... by 'itpro' (17 Aug 2012 @ 14:36)

Re: Red.... by 'RedDragonRacing' (17 Aug 2012 @ 20:11)

re: itpro. wrong wrong wrong wrong wrong by 'BFD' (17 Aug 2012 @ 21:18)

re: itpro. wrong wrong wrong wrong wrong by 'itpro' (18 Aug 2012 @ 0:40)

re: itpro. wrong wrong wrong wrong wrong by 'richpudd2003' (19 Aug 2012 @ 23:51)

OK Red... I apologise for the idiots, though! by 'itpro' (18 Aug 2012 @ 0:34)

Re: Classic! by 'PoppaAl' (18 Aug 2012 @ 10:09)

Re: OK Red... I apologise for the idiots, though! by 'markmorton' (18 Aug 2012 @ 17:38)

Re: OK Red... I apologise for the idiots, though! by 'RedDragonRacing' (20 Aug 2012 @ 9:57)

Re: Red.... by 'RedDragonRacing' (27 Aug 2012 @ 9:58)

Re: Red.... by 'John' (28 Aug 2012 @ 8:14)

Re: Red.... by 'itpro' (30 Aug 2012 @ 1:46)

Re: Red.... by 'BFD' (30 Aug 2012 @ 6:48)

Re: Red.... by 'itpro' (30 Aug 2012 @ 17:42)

Re: Red.... by 'BFD' (30 Aug 2012 @ 20:57)

Re: Red.... by 'BFD' (30 Aug 2012 @ 21:04)

Re: Red.... by 'itpro' (31 Aug 2012 @ 0:48)

Re: Red.... by 'BFD' (31 Aug 2012 @ 7:15)

Re: Red.... by 'itpro' (31 Aug 2012 @ 11:37)

Re: Red.... by 'BFD' (31 Aug 2012 @ 18:24)

Re: Red.... by 'Aquila' (31 Aug 2012 @ 18:28)

Re: Red.... by 'itpro' (02 Sep 2012 @ 1:14)

Re: Red.... by 'Traxtar' (02 Sep 2012 @ 20:19)

Re: Red.... by 'BFD' (02 Sep 2012 @ 22:14)

Re: Red.... by 'Traxtar' (02 Sep 2012 @ 22:24)

Traxtar..... by 'itpro' (03 Sep 2012 @ 1:36)

Re: Traxtar..... by 'BFD' (03 Sep 2012 @ 7:51)

Re: Traxtar..... by 'sawf' (03 Sep 2012 @ 10:28)

Re: Red.... by 'PaulMRotax' (31 Aug 2012 @ 7:58)

Re: Red.... by 'John' (31 Aug 2012 @ 8:37)

Re: Red.... by 'PaulMRotax' (31 Aug 2012 @ 11:19)

Re: Red.... by 'itpro' (31 Aug 2012 @ 11:31)

Re: Red.... by 'PaulMRotax' (31 Aug 2012 @ 11:35)

Re: Red.... by 'itpro' (31 Aug 2012 @ 11:39)

Re: Red.... by 'PaulMRotax' (31 Aug 2012 @ 11:51)

Re: Red.... by 'itpro' (31 Aug 2012 @ 12:27)

Re: Red.... by 'PaulMRotax' (31 Aug 2012 @ 12:30)

Re: Errrr...... well...... by 'NJB' (23 Aug 2012 @ 17:11)

Re: Errrr...... well...... by 'RedDragonRacing' (27 Aug 2012 @ 9:47)

Re: Errrr...... well...... by 'Andy99' (30 Aug 2012 @ 9:56)

Re: Errrr...... well...... by 'RedDragonRacing' (30 Aug 2012 @ 10:26)

Re: Errrr...... well...... by 'Liam' (21 Aug 2012 @ 14:18)

Re: Errrr...... well...... by 'itpro' (21 Aug 2012 @ 15:57)

Re: Errrr...... well...... by 'Liam' (21 Aug 2012 @ 20:54)

Re: Lifting inside wheel - beginner's guide by 'SimonS' (18 Aug 2012 @ 12:13)

Re: Lifting inside wheel - beginner's guide by 'RedDragonRacing' (20 Aug 2012 @ 9:36)

Re: Lifting inside wheel - beginner's guide by 'itpro' (20 Aug 2012 @ 10:43)

Re: Lifting inside wheel - beginner's guide by 'SimonS' (21 Aug 2012 @ 1:49)

Re: Lifting inside wheel - beginner's guide by 'itpro' (21 Aug 2012 @ 2:20)

Re: Lifting inside wheel - beginner's guide by 'd-i-y71' (21 Aug 2012 @ 12:53)

Is wheel lift only from turn-in till apex? by 'RedDragonRacing' (21 Aug 2012 @ 13:18)

Re: Is wheel lift only from turn-in till apex? by 'itpro' (21 Aug 2012 @ 16:42)

Re: Is wheel lift only from turn-in till apex? by 'Liam' (21 Aug 2012 @ 20:43)

Re: Is wheel lift only from turn-in till apex? by 'itpro' (21 Aug 2012 @ 20:51)

Re: Is wheel lift only from turn-in till apex? by 'Liam' (21 Aug 2012 @ 21:08)

Re: Is wheel lift only from turn-in till apex? by 'Traxtar' (21 Aug 2012 @ 22:49)

Re: Is wheel lift only from turn-in till apex? by 'Liam' (21 Aug 2012 @ 23:56)

Re: Is wheel lift only from turn-in till apex? by 'richpudd2003' (22 Aug 2012 @ 0:36)

Re: Is wheel lift only from turn-in till apex? by 'Liam' (22 Aug 2012 @ 2:09)

Re: Is wheel lift only from turn-in till apex? by 'itpro' (22 Aug 2012 @ 10:34)

Re: Is wheel lift only from turn-in till apex? by 'richpudd2003' (22 Aug 2012 @ 11:47)

Re: Is wheel lift only from turn-in till apex? by 'Traxtar' (22 Aug 2012 @ 12:20)

Re: Is wheel lift only from turn-in till apex? by 'RedDragonRacing' (22 Aug 2012 @ 10:37)

Re: Possibly better video to highlight steer angle by 'NikG' (22 Aug 2012 @ 15:16)

Re: Possibly better video to highlight steer angle by 'Traxtar' (22 Aug 2012 @ 15:23)

Re: Possibly better video to highlight steer angle by 'NikG' (22 Aug 2012 @ 15:38)

Re: Lifting inside wheel - beginner's guide by 'd-i-y71' (20 Aug 2012 @ 12:40)

Perfect weigth distribution? by 'RedDragonRacing' (20 Aug 2012 @ 10:03)

Re: Perfect weigth distribution? by 'itpro' (20 Aug 2012 @ 11:10)

Re: Perfect weigth distribution? by 'RedDragonRacing' (21 Aug 2012 @ 12:27)

Re: Perfect weigth distribution? by 'itpro' (21 Aug 2012 @ 16:02)

Re: Perfect weigth distribution? by 'Traxtar' (21 Aug 2012 @ 17:21)

Re: Perfect weigth distribution? by 'BFD' (21 Aug 2012 @ 18:53)

Re: Perfect weigth distribution? by 'Farrang' (21 Aug 2012 @ 19:16)

Re: Perfect weigth distribution? by 'RedDragonRacing' (22 Aug 2012 @ 10:51)

Re: Perfect weigth distribution? by 'Aquila' (21 Aug 2012 @ 22:09)

good to see a lively debate.... by 'NJB' (22 Aug 2012 @ 8:07)

Re: good to see a lively debate.... by 'itpro' (22 Aug 2012 @ 10:37)

Re: good to see a lively debate.... by 'BFD' (22 Aug 2012 @ 18:01)

Re: good to see a lively debate.... by 'EtheT' (24 Aug 2012 @ 15:55)

Re: good to see a lively debate.... by 'BFD' (24 Aug 2012 @ 17:28)

Re: good to see a lively debate.... by 'richpudd2003' (24 Aug 2012 @ 18:03)

Re: good to see a lively debate.... by 'BFD' (24 Aug 2012 @ 23:08)

Re: good to see a lively debate.... by 'Traxtar' (25 Aug 2012 @ 0:46)

Re: Lifting inside wheel - beginner's guide by 'RedDragonRacing' (01 Oct 2012 @ 15:49)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links