UK Karting - Notice Board (General Karting) : Re: Removing bearing from front hub

Notice Board (General Karting)

Re: Removing bearing from front hub
Posted by 'Aquila' on 26 Feb 2011 @ 21:07

| View Message Thread | Reply to this message |

AquilaJoined: January 2009
Total Posts: 9
[ View User Profile ]

put the hubs in the oven for a bit.....cant remember temperature...about 100 for a few minutes, enuf to make them warm to the touch, take them out, put a screw driver in where the kingpin was and they should pop right out...might take a bit of experimentation with temperatures...but u get the jist!

to put in new bearings, put the bearings in the freezer while the hubs are in the oven then they should drop right in when you take them out of the freezer

Message Thread:

Removing bearing from front hub by 'doctor46' (26 Feb 2011 @ 19:40)

Re: Removing bearing from front hub by 'Ditch' (26 Feb 2011 @ 20:55)

Re: Removing bearing from front hub by 'Aquila' << You are here!

Re: Removing bearing from front hub by 'Ditch' (26 Feb 2011 @ 21:15)

Re: Removing bearing from front hub by 'doctor46' (27 Feb 2011 @ 13:13)

Re: Removing bearing from front hub by 'QuickOldTimer' (27 Feb 2011 @ 17:11)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links