UK Karting - Notice Board (General Karting) : Re: Removing bearing from front hub

Notice Board (General Karting)

Re: Removing bearing from front hub
Posted by 'Ditch' on 26 Feb 2011 @ 20:55

| View Message Thread | Reply to this message |

DitchJoined: June 2005
Total Posts: 7
[ View User Profile ]

One way to make it easier is warm it up and then with a drift or screwdriver carefully tap it out with a hammer evenly around the bearing. When putting new ones in ONLY tap them in on the outside of the bearing and using a socket or similar sized block push them in or you will wreck them straight away.Another way is a long bolt and thick washers/or specially made ones that are the same size as the bearings and tighten it up and they will pull in evenly.

Message Thread:

Removing bearing from front hub by 'doctor46' (26 Feb 2011 @ 19:40)

Re: Removing bearing from front hub by 'Ditch' << You are here!

Re: Removing bearing from front hub by 'Aquila' (26 Feb 2011 @ 21:07)

Re: Removing bearing from front hub by 'Ditch' (26 Feb 2011 @ 21:15)

Re: Removing bearing from front hub by 'doctor46' (27 Feb 2011 @ 13:13)

Re: Removing bearing from front hub by 'QuickOldTimer' (27 Feb 2011 @ 17:11)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links