UK Karting - Notice Board (Combined Forum) : Re: Rotax max prevo carb

Notice Board (Combined Forum)

Re: Rotax max prevo carb - choke
Posted by 'alanrr' on 07 Aug 2018 @ 21:47

| View Message Thread | Reply to this message |

alanrrJoined: August 2001
Total Posts: 491
[ View User Profile ]

The two washers you have are for the needle valve body seat.

You remove the seat with a thin walled socket.

you will see the washer in the carb body and you will have to flick it out.

Make sure you get it all as they can laminate and leave part of it behind.

You will get DQ'd if a scrutineer finds more than a whole washer!

You need to use the fibre washer, not the copper washer.

Regarding the choke lever, There is a very thin O ring under the choke lever to seat it to the carb body.

The only other 'washer' is the bottom of the choke shaft that seals off the choke chamber and isn't part of the kit or removable.

Message Thread:

Rotax max prevo carb - choke by 'JohnWDorset' (07 Aug 2018 @ 11:44)

Re: Rotax max prevo carb - choke by 'alanrr' << You are here!

Re: Rotax max prevo carb - choke by 'alanrr' (07 Aug 2018 @ 21:51)

Re: Rotax max prevo carb - choke by 'JohnWDorset' (08 Aug 2018 @ 12:58)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links