UK Karting - Notice Board (Combined Forum) : Re: Benefits of GX160 head skim/block decking

Notice Board (Combined Forum)

Re: Benefits of GX160 head skim/block decking
Posted by 'Knighty' on 23 May 2018 @ 18:07

| View Message Thread | Reply to this message |

KnightyJoined: May 2014
Total Posts: 470
[ View User Profile ]

the initial answer is "yes"

but if its 0.1mm away it sounds like they have already been skimmed, but conservatively......but even I have seen some heads that are bang on the head limit at 43.80......and the no-go gauge slips over - oh dear!.....dodgy territory.....hence for the head most are machined a bit above the legal limits just to be safe in scrutineering.

each 0.1mm skim is worth 0.36cc......the head volume is around 19cc or so (for a crap one)......so a 0.1mm skim is 1.9% of the head volume, which in case you were wondering is a big relationship to performance, hence people spend so much time skimming heads and blocks to the limits, then running oil in the fuel on test days to increase the compression ratio.

Best of luck.

Message Thread:

Benefits of GX160 head skim/block decking by 'JamesHughes' (23 May 2018 @ 11:44)

Re: Benefits of GX160 head skim/block decking by 'Knighty' << You are here!

Re: Benefits of GX160 head skim/block decking by 'JamesHughes' (24 May 2018 @ 11:07)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links