UK Karting - Notice Board (Combined Forum) : Re: Rotax evo powervalve

Notice Board (Combined Forum)

Re: Rotax evo powervalve
Posted by 'alanrr' on 06 Feb 2018 @ 16:52

| View Message Thread | Reply to this message |

alanrrJoined: August 2001
Total Posts: 491
[ View User Profile ]

Doh! Sorry, completely missed the 'evo' bit.

82.5 should be ok. You may not be able to get it any shorter than that as the stud might be too long.

With the old power valve studs they did vary in length.

That's why we could get the length down to 72mm.

I know some builders set the EVO valve to 80-81mm but you may find you can't get near that because of the stud length.

82.5-83,5 is probably the window you will be in.

Check that the valve does in fact open fully by raising it with your finger up the exhaust header.

Do it with the battery disconnected or on your own, just in case!

Message Thread:

Rotax evo powervalve by 'Gillardboy' (05 Feb 2018 @ 17:13)

Re: Rotax evo powervalve by 'alanrr' (05 Feb 2018 @ 21:46)

Re: Rotax evo powervalve by 'Gillardboy' (06 Feb 2018 @ 8:52)

Re: Rotax evo powervalve by 'alanrr' << You are here!

Re: Rotax evo powervalve by 'Gillardboy' (06 Feb 2018 @ 17:03)

Re: Rotax evo powervalve by 'alanrr' (06 Feb 2018 @ 22:38)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links