We will be moving up from Iame Cadet to X30 over the course of the year having just purchased a X39 running on a Birel Chasis, not convinced about the chassis but will see how it goes. Although purchased as a junior we will be running in the new Mini class when launched in September. I am assuming set-up etc won't be that different to Junior hence a few questions just to get us started:
1. What fuel oil ratio should we be running.
2. What plugs should we be running hot and cold
3. Sprocket sizes for Shenny, Whilton Mill and PFI
4. Engine low/ high revs we should be looking to achieve at the above tracks
5. Engine temperature we should be expecting.
6. Basic set-up advise for both dry and wet
7. Wheels we should be running dry and wet
8. Tyre life bearing in mind we are not looking to be at the front over the next few months just plenty of seat time
Sorry a bit lengthy just want to get off on the right foot to start with rather than wasting time like we did in cadets.
Any advise/ help would be greatly appreciated.
Cheers!
|
|
X30 Junior - Newbie Advise by 'PennyLessDad' << You are here!
