UK Karting - Notice Board (Combined Forum) : Re: KC Hydraulic Brake Adjustment

Notice Board (Combined Forum)

Re: KC Hydraulic Brake Adjustment
Posted by 'Bobster' on 28 Jan 2016 @ 16:37

| View Message Thread | Reply to this message |

BobsterJoined: September 2015
Total Posts: 31
[ View User Profile ]

Hi
As the brakes wear there is more travel for the pads before they come into contact with the disc. Does your kart have thick or thin disc rotor? If it has a thin rotor about 4mm it will prob be a SWRD or Simon Wright brake.Either way you will need to fit shims between the pads and the caliper pistons to take up the slack, you can buy them or you could make some out of Aluminium sheet in various thickness sizes. Also you may need to replace the fluid as a matter of course.....We use API 551 brake fluid as we have the SWRD brake on our 2012 PJ1....I use a large syringe to bleed our brakes...but you can buy a specialised brake bleeding kit for about Ł45.....(Yeah so save yourself some money and buy a couple of large syringes and some plastic hose from ebay! :-)
Hope this helps!
Bob

Message Thread:

KC Hydraulic Brake Adjustment by 'AndrewC' (28 Jan 2016 @ 11:30)

Re: KC Hydraulic Brake Adjustment by 'Bobster' << You are here!

Re: KC Hydraulic Brake Adjustment by 'Mark 71' (28 Jan 2016 @ 18:09)

Re: KC Hydraulic Brake Adjustment by 'AndrewC' (28 Jan 2016 @ 19:44)

Re: KC Hydraulic Brake Adjustment by 'lard ass bob' (29 Jan 2016 @ 22:47)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links