UK Karting - Notice Board (Combined Forum) : Re: MS kart not turning in well?

Notice Board (Combined Forum)

Re: MS kart not turning in well?
Posted by 'lard ass bob' on 11 Jan 2016 @ 10:26

| View Message Thread | Reply to this message |

lard ass bobJoined: August 2001
Total Posts: 41
[ View User Profile ]

They sound like caster inserts which were last used on the early 2010 frames. Later frames had the round eccentric camber/caster pills.

Your will have a number on it. The largest was 2 and reduced in 0.5 increments to a round one which was zero. There will also be one on the bottom of the "c". Adjusting the camber/caster with these is easy. If you have the alternative numbered inserts it is simply a matter of unbolting the king pin (the Allen headed bolt you mention) and replacing the insert as necessary. If you look at one you will see that the hole is off centre. If the thinest part is pointing forward and say you are using a 2 insert that will be caster off by 2 degrees. If the bottom insert is also a 2 the thinest part should be facing back which will achieve a further 2 degrees caster off. Spinning both of these through 180 degrees you can add 4 degrees caster on in total. If these are the 2 extremes using different insets top and bottom you can achieve every increment in between.

Camber can be achieved by turning the inserts up to 90 degrees. Yes it does reduce the caster but that is the compromise with this set up.

Graeme

Message Thread:

MS kart not turning in well? by 'Rapidshed' (05 Jan 2016 @ 20:30)

Re: MS kart not turning in well? by 'Bobster' (06 Jan 2016 @ 12:21)

Re: MS kart not turning in well? by 'Rapidshed' (06 Jan 2016 @ 14:55)

Re: MS kart not turning in well? by 'raceinstructor' (06 Jan 2016 @ 15:12)

Re: MS kart not turning in well? by 'lard ass bob' (06 Jan 2016 @ 20:33)

Re: MS kart not turning in well? by 'Rapidshed' (08 Jan 2016 @ 12:47)

Re: MS kart not turning in well? by 'Andyb' (08 Jan 2016 @ 15:48)

Re: MS kart not turning in well? by 'Rapidshed' (08 Jan 2016 @ 20:48)

Re: MS kart not turning in well? by 'lard ass bob' (09 Jan 2016 @ 10:34)

Re: MS kart not turning in well? by 'Rapidshed' (09 Jan 2016 @ 11:11)

Re: MS kart not turning in well? by 'lard ass bob' << You are here!

Re: MS kart not turning in well? by 'Rapidshed' (11 Jan 2016 @ 22:48)

Re: MS kart not turning in well? by 'lard ass bob' (12 Jan 2016 @ 21:35)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links