UK Karting - Notice Board (Combined Forum) : Re: 2011 MS kart dry set up

Notice Board (Combined Forum)

Re: 2011 MS kart dry set up
Posted by 'lard ass bob' on 22 Dec 2015 @ 11:02

| View Message Thread | Reply to this message |

lard ass bobJoined: August 2001
Total Posts: 41
[ View User Profile ]

I presume you are refering to front and rear width rather than diameter.

assuming you are running 130mm fronts and 212mm rears on Bridgestone YDS tyres the distance between inside wheel rims at the front is 850mm and rear 875mm.

A more popular measurement is simply front and rear width against a fixed point. At the front, for example, you will have various spacers on the stub axle (typically 5 and 10mm). Dry set up on standard hubs and rims is typically nothing on the inside except the small silver spacer. At the rear the typical dimension is taken from the bearing carrier out the the face of the rear hub. On the standard LV mag rim the measurement is typically 150mm. The only variable to be aware of with both of these is the offset of the rims if you are not using the Douglas LV mag rims but you simply adjust the measurements to compensate for the difference. The distances between the rims will identify differences.

Graeme

Message Thread:

2011 MS kart dry set up by 'Rapidshed' (14 Dec 2015 @ 20:49)

Re: 2011 MS kart dry set up by 'lard ass bob' (15 Dec 2015 @ 17:34)

Re: 2011 MS kart dry set up by 'Rapidshed' (19 Dec 2015 @ 13:35)

Re: 2011 MS kart dry set up by 'lard ass bob' << You are here!

Re: 2011 MS kart dry set up by 'Rapidshed' (22 Dec 2015 @ 22:41)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links