UK Karting - Notice Board (Combined Forum) : Re: pin ajustment in rotax carb

Notice Board (Combined Forum)

Re: pin ajustment in rotax carb
Posted by 'alanrr' on 26 Jul 2015 @ 13:11

| View Message Thread | Reply to this message |

alanrrJoined: August 2001
Total Posts: 491
[ View User Profile ]

Well it should have 5 grooves.

The lower the clip is set, the richer the setting is.

Lowering the clip actually raises the needle and thus allows more fuel past.

The needle is used because the Dellorto is a fixed jet carburetor unlike a Tillotson or Walbro.

There are many different profiles available but only the k27 and k98 are allowed in Rotax.

The 27 is a thinner profile and produces a richer range.

Clip 2 is a base setting.

The needle is effective between 1/4 and 3/4 throttle openings.

Message Thread:

pin ajustment in rotax carb by 'Budge1987' (26 Jul 2015 @ 8:12)

Re: pin ajustment in rotax carb by 'alanrr' << You are here!

Re: pin ajustment in rotax carb by 'Budge1987' (28 Jul 2015 @ 8:59)

Re: pin ajustment in rotax carb by 'alanrr' (28 Jul 2015 @ 10:22)

Re: pin ajustment in rotax carb by 'Budge1987' (28 Jul 2015 @ 15:42)

Re: pin ajustment in rotax carb by 'PaulMRotax' (28 Jul 2015 @ 17:44)

Re: pin ajustment in rotax carb by 'alanrr' (28 Jul 2015 @ 19:54)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links