UK Karting - Notice Board (Combined Forum) : Re: Standard length for tonykart otk track rods

Notice Board (Combined Forum)

Re: Standard length for tonykart otk track rods
Posted by 'SimonS' on 03 Feb 2015 @ 09:18

| View Message Thread | Reply to this message |

SimonSJoined: December 2004
Total Posts: 4
[ View User Profile ]

You can get them in various lengths to fit the degree of ackermann that you are running.

This will change depending on which holes you choose on the drag link and on the steering arm by about 25 mm

25mm is really too much to compensate by adjusting the rose threads.

However, as far as I know the track is centralised (ie the track rods are of equal length) so measure the distance from the centre of your rose end to the beginning of the thread (the bit nearest the hole) and add 10mm (the thickness of the locking nut and 5mm of adjustment, then set the steering to zero toe in, measure the distance between your two chosen holes, subtract twice the rose end distance and that's your standard length.

Message Thread:

Standard length for tonykart otk track rods by 'Nifnof' (02 Feb 2015 @ 20:53)

Re: Standard length for tonykart otk track rods by 'SimonS' << You are here!

Re: Standard length for tonykart otk track rods by 'alanrr' (03 Feb 2015 @ 12:40)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links