UK Karting - Notice Board (Combined Forum) : Re: Rotax 09

Notice Board (Combined Forum)

Re: Rotax 09 - update
Posted by 'John' on 07 Feb 2009 @ 15:51

| View Message Thread | Reply to this message |

JohnJoined: August 2001
Total Posts: 1
[ View User Profile ]

The cylinders (commencing February production) are going to now include CNC machining as described below:-

· CNC machining all around the exhaust port to further minimize the tolerances of exhaust port timing

· CNC machining of the chamfer around the exhaust port to minimize variation of appearance and to improve durability of the piston and ring

· CNC machining on the top edge of the central boost port to minimize the tolerance of port timing

· CNC machining all around the exhaust port which will allow the technical scrutineer to confirm the original condition of the cylinder

Rotax have advised that these cylinders have been carefully tested and developed to ensure that the power output is the same as well performing legal cylinders that are already on the market.

Message Thread:

Rotax 09 by 'spindle' (28 Jan 2009 @ 18:21)

Re: Rotax 09 by 'John' (28 Jan 2009 @ 18:44)

Re: Rotax 09 by 'tonyracer' (28 Jan 2009 @ 19:25)

Re: Rotax 09 by 'John' (28 Jan 2009 @ 19:34)

Re: Rotax 09 by 'tonyracer' (28 Jan 2009 @ 19:44)

Re: Rotax 09 by 'spindle' (28 Jan 2009 @ 20:32)

Re: Rotax 09 by 'razh54' (28 Jan 2009 @ 21:41)

Re: Rotax 09 by 'tonyracer' (28 Jan 2009 @ 22:12)

Re: Rotax 09 by 'gregjersey' (28 Jan 2009 @ 23:17)

Re: Rotax 09 by 'Invader' (29 Jan 2009 @ 0:36)

Re: Rotax 09 by 'tonyracer' (29 Jan 2009 @ 1:34)

Re: Rotax 09 by 'razh54' (29 Jan 2009 @ 8:01)

Re: Rotax 09 by 'Invader' (29 Jan 2009 @ 9:03)

Re: Rotax 09 by 'KenE' (29 Jan 2009 @ 10:37)

Re: Rotax 09's as good as the best out there...... by 'ScoobyScene' (29 Jan 2009 @ 11:02)

Re: Rotax 09's as good as the best out there...... by 'qedrat' (29 Jan 2009 @ 11:17)

Re: Rotax 09's as good as the best out there...... by 'razh54' (29 Jan 2009 @ 15:52)

Re: Rotax 09's as good as the best out there...... by 'gettingquicker' (29 Jan 2009 @ 17:58)

Re: Rotax 09's as good as the best out there...... by 'stecrmh51' (29 Jan 2009 @ 18:25)

you cannot machine a rotax barrel .. by 'Chad' (30 Jan 2009 @ 0:00)

Chad? by 'itpro' (30 Jan 2009 @ 0:33)

08 barrels by 'BanzaiBoy' (30 Jan 2009 @ 7:47)

Re: 08 barrels by 'chriskasch' (30 Jan 2009 @ 9:06)

Re: 08 barrels by 'blobslosak' (30 Jan 2009 @ 10:45)

Chris by 'stecrmh51' (30 Jan 2009 @ 14:01)

Re: Chad? by 'gregjersey' (30 Jan 2009 @ 19:07)

Re: Chad? by 'itpro' (30 Jan 2009 @ 19:53)

Re: Chad? by 'gregjersey' (30 Jan 2009 @ 20:36)

Re: Chad? by 'QuickOldTimer' (30 Jan 2009 @ 21:02)

Re: Chad? by 'itpro' (31 Jan 2009 @ 0:53)

Re: Rotax 09 by 'oldun' (30 Jan 2009 @ 11:40)

Re: Rotax 09 by 'sinky' (30 Jan 2009 @ 19:58)

Re: Rotax 09 by 'oldun' (30 Jan 2009 @ 23:47)

Re: Rotax 09 by 'oldun' (31 Jan 2009 @ 0:51)

Oldun by 'itpro' (31 Jan 2009 @ 1:50)

Re: Itpro by 'John' (31 Jan 2009 @ 7:45)

Re: Oldun by 'NJB' (31 Jan 2009 @ 9:46)

Re: Oldun by 'QuickOldTimer' (31 Jan 2009 @ 10:09)

Re: Oldun by 'John' (31 Jan 2009 @ 10:57)

The more restricted... by 'NJB' (31 Jan 2009 @ 12:04)

Re: The more restricted...NJB by 'itpro' (31 Jan 2009 @ 12:29)

Re: Oldun by 'oldun' (31 Jan 2009 @ 23:45)

Re: Oldun by 'NikG' (31 Jan 2009 @ 23:58)

Re: Oldun by 'John' (01 Feb 2009 @ 8:20)

Oldun by 'NJB' (01 Feb 2009 @ 10:21)

Re: Oldun by 'oldun' (02 Feb 2009 @ 0:40)

Re: Oldun by 'itpro' (02 Feb 2009 @ 11:56)

Re: Oldun by 'NJB' (02 Feb 2009 @ 12:41)

Re: Oldun by 'itpro' (02 Feb 2009 @ 13:46)

Re: Oldun - cover your eyes ! by 'John' (02 Feb 2009 @ 14:09)

John by 'itpro' (02 Feb 2009 @ 16:00)

Re: Oldun by 'oldun' (02 Feb 2009 @ 21:32)

Re: Oldun by 'itpro' (02 Feb 2009 @ 22:43)

Re: Oldun by 'razh54' (01 Feb 2009 @ 10:47)

Re: Oldun by 'John' (01 Feb 2009 @ 12:39)

John by 'QuickOldTimer' (01 Feb 2009 @ 13:50)

Re: John by 'John' (01 Feb 2009 @ 14:21)

Re: John... ........ by 'itpro' (01 Feb 2009 @ 18:23)

even if they CNC the port opening........ by 'Chad' (01 Feb 2009 @ 23:49)

Re: Ian by 'John' (02 Feb 2009 @ 19:55)

Re: Ian by 'itpro' (02 Feb 2009 @ 22:43)

Re: Rotax 09 by 'sinky' (31 Jan 2009 @ 13:23)

Re: Rotax 09 - update by 'John' << You are here!

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links