UK Karting - Notice Board (Combined Forum) : Advice on brake bleeding please.

Notice Board (Combined Forum)

Advice on brake bleeding please.
Posted by 'Chickenbone' on 11 Jan 2009 @ 17:50

| View Message Thread | Reply to this message |

ChickenboneJoined: December 2006
Total Posts: 1
[ View User Profile ]

I'm overhauling my TonyKart ProKart, It's all stripped down to the bare chassis and need to get the brakes sorted now I've taken them off. Its got the OTK twin master cylinders (without the reservoir on top- I think thats the older non self-adjusting type) and a non-original Kart Components rear caliper. I've never bled brakes of any sort (kart car or bike), so how do I do it? Looking at all the components, there doesn't seem to be anything that I'd recognise as a bleed nipple, so what do I do? Fill the system, pump it and slack off one of the fittings until it looks as if there's no air leaking out and tighten up..or what? The brakes were working OK before I stripped the chassis, but I found it's missing a circlip on the end of the master cylinder -I discovered that when I took off the red rubber boot and the piston and the fluid came out! I've got plenty of other stuff to sort first, but in the next week I'm going to have to put all this back together again...help!!

Message Thread:

Advice on brake bleeding please. by 'Chickenbone' << You are here!

Re: Advice on brake bleeding please. by 'yeoy' (11 Jan 2009 @ 21:23)

Re: Advice on brake bleeding please. by 'DanielKC' (11 Jan 2009 @ 21:27)

Re: Advice on brake bleeding please. by 'Chickenbone' (11 Jan 2009 @ 21:43)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links