UK Karting - Notice Board (4-Stroke Karting) : Re: GX160 Cadet Sticking Throttle

Notice Board (4-Stroke Karting)

Re: GX160 Cadet Sticking Throttle
Posted by 'Knighty' on 25 Apr 2016 @ 15:09

| View Message Thread | Reply to this message |

KnightyJoined: May 2014
Total Posts: 470
[ View User Profile ]

where the cable runs behind the seat into the engine, this sometimes causes a dog-leg bend in the cable causing friction, also any cable-ties applied on the frame can also cause a local pressure point, avoid any tight bends and keep the cable-outer as flowing as possible, so to speak

On the linkage, the M6 nut which is visible from the top sometimes needs to be looser than you realize, back it off half a turn at a time and see what happens

failing that, the inner liner can really degrade badly with age and use and it fills with powder which causes it to bind up, and you just need to chuck it in the bin and replace it, they are peanuts new, and its not worth the risk......fit a new one

Message Thread:

GX160 Cadet Sticking Throttle by 'WDave' (25 Apr 2016 @ 13:48)

Re: GX160 Cadet Sticking Throttle by 'Knighty' << You are here!

Re: GX160 Cadet Sticking Throttle by 'MichaelW' (25 Apr 2016 @ 22:03)

Re: GX160 Cadet Sticking Throttle by 'Knighty' (26 Apr 2016 @ 8:05)

Re: GX160 Cadet Sticking Throttle by 'JimG' (26 Apr 2016 @ 12:13)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links