UK Karting - Notice Board (2-Stroke Karting) : Re: Flow rate?

Notice Board (2-Stroke Karting)

Re: Flow rate?
Posted by 'Andy99' on 03 Jan 2013 @ 16:43

| View Message Thread | Reply to this message |

Andy99Joined: September 2010
Total Posts: 1
[ View User Profile ]

I own a measurement laboratory that specialises in accurate measurement for the aerospace industry. We have measured these jets for a few people now and we were shocked at the results. One Jet marked 1.48 mm actually measured 1.6152 mm and this was the mean calculated smallest diameter. We also found that bore was not parallel, the entrance / exit of the bore was bell mouthed, the bore was not perpendicular to the top and bottom face of the jet and in some cases the bore looked more like a fifty pence piece rather than a nice round cylinder I would personally make sure all the jets that you use are measured / tested by any means you have available before using them.

Message Thread:

Kart Genie measured jets by 'TeamPoor' (26 Dec 2012 @ 22:05)

Re: Kart Genie measured jets by 'max75' (27 Dec 2012 @ 8:05)

Re: Kart Genie measured jets by 'newminidriver' (28 Dec 2012 @ 0:27)

Re: Kart Genie measured jets by 'max75' (28 Dec 2012 @ 8:55)

You don't need Kart Genie measured jets! by 'MJC' (01 Jan 2013 @ 1:45)

Re: You don't need Kart Genie measured jets! by 'max75' (01 Jan 2013 @ 6:35)

Re: You don't need Kart Genie measured jets! by 'Hootsman' (01 Jan 2013 @ 11:03)

Re: You don't need Kart Genie measured jets! by 'newminidriver' (01 Jan 2013 @ 20:14)

Re: You don't need Kart Genie measured jets! by 'MJC' (01 Jan 2013 @ 22:31)

how would you test the flow by 'moondog78' (02 Jan 2013 @ 2:22)

Re: how would you test the flow by 'stecrmh51' (02 Jan 2013 @ 7:09)

Re: how would you test the flow by 'MJC' (02 Jan 2013 @ 8:25)

Re: how would you test the flow-MJC by 'BrianP' (02 Jan 2013 @ 9:46)

Re: what do I do now by 'TeamPoor' (02 Jan 2013 @ 12:54)

Re: how would you test the flow-MJC by 'MJC' (03 Jan 2013 @ 3:08)

Re: how would you test the flow by 'Rainman' (03 Jan 2013 @ 2:48)

Re: how would you test the flow by 'MJC' (03 Jan 2013 @ 3:28)

Re: where does it tell you by 'moondog78' (02 Jan 2013 @ 13:14)

Re: where does it tell you by 'PaulMRotax' (02 Jan 2013 @ 17:35)

Re: where does it tell you by 'stecrmh51' (02 Jan 2013 @ 18:34)

Re: where does it tell you by 'MikeSimpsonsnr' (02 Jan 2013 @ 21:35)

Re: where does it tell you by 'PoppaAl' (03 Jan 2013 @ 8:19)

Re: where does it tell you by 'MikeSimpsonsnr' (03 Jan 2013 @ 11:21)

Re: where does it tell you by 'TeamPoor' (03 Jan 2013 @ 11:42)

Re: Jet raffle by 'TeamPoor' (03 Jan 2013 @ 11:28)

Re: Jet raffle by 'MikeSimpsonsnr' (03 Jan 2013 @ 11:31)

Re: Jet raffle by 'TeamPoor' (03 Jan 2013 @ 11:51)

Re: Jet raffle by 'MikeSimpsonsnr' (03 Jan 2013 @ 12:04)

jet tech software by 'moondog78' (03 Jan 2013 @ 20:57)

Re: jet tech software by 'MikeSimpsonsnr' (03 Jan 2013 @ 21:10)

Re: jet tech software by 'MikeSimpsonsnr' (03 Jan 2013 @ 21:11)

No? please explain? by 'moondog78' (03 Jan 2013 @ 21:19)

I wonder? by 'moondog78' (04 Jan 2013 @ 10:00)

Re: the jet correlating to the software design? by 'John' (04 Jan 2013 @ 14:45)

Re: the jet correlating to the software design? by 'moondog78' (04 Jan 2013 @ 15:32)

Re: the jet correlating to the software design? by 'John' (04 Jan 2013 @ 16:44)

Re: the jet correlating to the software design? by 'moondog78' (04 Jan 2013 @ 17:16)

Re: the jet correlating to the software design? by 'richydehav' (04 Jan 2013 @ 18:31)

Re: the jet correlating to the software design? by 'moondog78' (04 Jan 2013 @ 18:38)

Re: the jet correlating to the software design? by 'John' (04 Jan 2013 @ 18:45)

Re: where does it tell you by 'jc82' (03 Jan 2013 @ 13:01)

Re: where does it tell you by 'MikeSimpsonsnr' (03 Jan 2013 @ 13:04)

Re: where does it tell you by 'jc82' (03 Jan 2013 @ 15:21)

Flow rate? by 'moondog78' (03 Jan 2013 @ 15:34)

Re: Flow rate? by 'Andy99' << You are here!

Re: Flow rate? by 'MikeSimpsonsnr' (03 Jan 2013 @ 21:14)

Re: Flow rate? by 'TeamPoor' (04 Jan 2013 @ 10:46)

Cheers by 'moondog78' (04 Jan 2013 @ 11:43)

My advice by 'Howtogofaster' (03 Jan 2013 @ 16:45)

Re: My advice by 'Traxtar' (03 Jan 2013 @ 16:55)

Re: My advice by 'PoppaAl' (03 Jan 2013 @ 19:54)

Re: My advice by 'MikeSimpsonsnr' (03 Jan 2013 @ 21:16)

Re: My advice by 'MikeSimpsonsnr' (03 Jan 2013 @ 21:17)

Re: My advice by 'Howtogofaster' (03 Jan 2013 @ 22:43)

Re: Sorry, Not my advise by 'PoppaAl' (04 Jan 2013 @ 9:22)

Re: My advice by 'DaveBuky' (22 Apr 2014 @ 20:36)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links