UK Karting - Notice Board (2-Stroke Karting) : Re: Help With Spares Package

Notice Board (2-Stroke Karting)

Re: Help With Spares Package
Posted by 'mike2903' on 23 Dec 2011 @ 11:32

| View Message Thread | Reply to this message |

mike2903Joined: July 2007
Total Posts: 1
[ View User Profile ]

axle drift

http://www.kartstore.co.uk/detail.cfm?item_id=3153&cat_id=1473

For OTK you'll need the 2.5mm and 7mm allen keys.

Too adjust your tracking the retaining nuts at the end of the track rod are a funny size but can't remember what it is.

Clutch Locking Tool
http://www.kartstore.co.uk/detail.cfm?item_id=1248&cat_id=1473

Jet Holder will come in handy
http://www.kartstore.co.uk/detail.cfm?item_id=3304&cat_id=1473

...and obviously jets.

Spring Puller
http://www.kartstore.co.uk/detail.cfm?item_id=434&cat_id=1473

Camber Tool saves a lot of fiddling
http://www.kartstore.co.uk/detail.cfm?item_id=5046&cat_id=1473

This also saves a lot of time if you're running extended front hubs. It's difficult to reposition the spacer on the stub axles 2 second job with this.
http://www.ebay.co.uk/itm/Kart-25mm-Front-Hub-Spacer-Alignment-Tool-New-Karting-/350471744989?pt=UK_Cars_Parts_Vehicles_Other_Vehicle_Parts_Accessories_ET&hash=item5199be6ddd

Spares you'll need track rods and bumper bolts (just the bolt not the whole assembly). A spare battery.

Secure your bumper....You'll need a spare torsion bar clamp and 2 small thin pieces of sheet metal probably 200mm long. Cut the clamp in half and secure to the chassis where you'd normally place your rear torsion bar and bend the 2 pieces of metal to fit and secure. This will save you some race finishes i guarantee it!

Depending on where you race you'll need different clutch drums ranging from 11 to 14. Or you get the following tool and some different engine sprockets and change as and when...

http://www.ebay.co.uk/itm/Kart-Sprocket-Removal-Tool-2009-Clutch-Rotax-Max-/350497884402?pt=UK_Cars_Parts_Vehicles_Other_Vehicle_Parts_Accessories_ET&hash=item519b4d48f2

To do this you'll also need a 38mm socket and sometimes an cadet axle to get passed the locktite.

I'm sure other people will suggest more things, hop this helps.

Mike

Message Thread:

Help With Spares Package by 'Newjohn' (23 Dec 2011 @ 5:59)

Re: Help With Spares Package by 'mike2903' << You are here!

Re: Help With Spares Package by 'John' (23 Dec 2011 @ 23:52)

Re: Help With Spares Package by 'Minisueg' (24 Dec 2011 @ 10:29)

Re: Help With Spares Package by 'Hootsman' (24 Dec 2011 @ 12:27)

Re: Help With Spares Package by 'Traxtar' (24 Dec 2011 @ 17:12)

Re: Help With Spares Package by 'Hootsman' (24 Dec 2011 @ 19:57)

Re: Help With Spares Package by 'Newjohn' (28 Dec 2011 @ 6:39)

Re: Help With Spares Package by 'Hootsman' (28 Dec 2011 @ 10:23)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links