UK Karting - Notice Board (2-Stroke Karting) : Re: Rotax starter motor

Notice Board (2-Stroke Karting)

Re: Rotax starter motor
Posted by 'SteveAW' on 30 Nov 2011 @ 10:09

| View Message Thread | Reply to this message |

SteveAWJoined: March 2002
Total Posts: 1
[ View User Profile ]

Hi Richard,
Had this problem many a time. As John says, drill them out, but be careful and use a slow drill setting. You want a 1.5mm drill bit just large enough to remove the screw heads from the thread below, but without drilling into the plastic. Once they're off you "should" be able to unscrew them with a fine tipped pair of pliars as you'll have about a mm of thread exposed.
I would definitely not punch them though.
Good luck!

Message Thread:

Rotax starter motor by 'richardmcculloch69' (28 Nov 2011 @ 17:51)

Re: Rotax starter motor by 'John' (29 Nov 2011 @ 16:10)

Re: Rotax starter motor by 'Bob' (30 Nov 2011 @ 7:30)

Re: Rotax starter motor by 'SteveAW' << You are here!

Re: Rotax starter motor by 'Ditch' (01 Dec 2011 @ 3:56)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links