, about 20ml out on This is the set up i used to run, bear in mind that everyone has a different set up especially in the wet depending on your driving style i turn the wheel full lock in the wet so i like an understeering kart but here is the set up...
25 ml on the front with L70 front hubs on it, front ride height 3 on top. You need to be on the outside holes on the collum and if you want to try it try the botton outside holes instead of the middle - I felt it improved the kart to turn. Rear you want standard size hubs and i think its 175ml from the bearing to the edge of the rear hub. A smaller rear bumper will help aswell prefferably the one where the bumper goes through two rings as its slightly softer. Axel. Medium!
Hope this helps
Matt Bell
|
|