hi there
before christmas i decided to overhaul the OTK brake system on my 05 racer tonykart. i renewed the seals in both the master cylinder and caliper. from what i understand, the seals in the caliper have been fitted correctly.
however the seals in one of the master cylinders may not be in correctly. if you take off the reservior caps and the brake is depressed a small bubble comes through the hole at the bottom of the reservior. there doesnt seem to be leakage to the rod that enters the master cylinder. the pedal feels hard and applies the brakes very quickly
does anyone on here know of a cause of this and a solution to the problem
i have made a short video to try and help explain whats happening. the reservior is the left one that is causing the most concern. its at
http://www.youtube.com/watch?v=LeqYJliAdho
hopefully i have included enough info but if you require more please ask and i will try my best to answer
many thanks
adrian
|
|