UK Karting

Notice Board
2-Stroke Karting


Welcome to the 2-Stroke Karting Forum. Please post questions and messages here that relate only to 2-Stroke. For General Karting, 4-Stroke and Chat please use the individual forums.






Tip: If you register you can customise the way messages are displayed.
Already registered? Log On to restore your preferences.


rotax max xlass  by 'gaz47'   (01 Oct 2010 @ 13:32)
Re: rotax max xlass  by 'rotaxvet'   (01 Oct 2010 @ 19:14)
Re: rotax max xlass  by 'gaz47'   (01 Oct 2010 @ 19:44)
Re: rotax max xlass  by 'pdapaul'   (01 Oct 2010 @ 20:51)
Re: rotax max xlass  by 'gaz47'   (01 Oct 2010 @ 21:25)
Re: rotax max xlass  by 'gaz47'   (01 Oct 2010 @ 21:30)
Re: rotax max xlass  by 'cobb22'   (01 Oct 2010 @ 21:43)
Re: rotax max xlass  by 'twiglet'   (01 Oct 2010 @ 21:58)

gearing at pfi  by 'honda'   (30 Sep 2010 @ 21:19)

gearing at pfi  by 'honda'   (30 Sep 2010 @ 21:15)

Rotax Carb floats  by '177racer'   (30 Sep 2010 @ 18:15)
Re: Rotax Carb floats  by 'raceinstructor'   (01 Oct 2010 @ 7:41)

Intrepid Storm (Cracking issues)  by 'PaulGarnerTKM'   (29 Sep 2010 @ 12:48)
Contact him direct....  by 'ScoobyScene'   (29 Sep 2010 @ 13:00)
I wonder what you expected from a cheapo?  by 'AlfieMoon'   (29 Sep 2010 @ 14:58)
Re: I wonder what you expected from a cheapo?  by 'PaulGarnerTKM'   (29 Sep 2010 @ 15:07)
I quite agree that it is not fit for purpose.  by 'AlfieMoon'   (29 Sep 2010 @ 15:53)
Re: I quite agree that it is not fit for purpose.  by 'ScoobyScene'   (29 Sep 2010 @ 16:12)
Re: I quite agree that it is not fit for purpose.  by 'drewdt3'   (29 Sep 2010 @ 16:21)
Re: I quite agree that it is not fit for purpose.  by 'kartcollector'   (29 Sep 2010 @ 17:30)
Re: I quite agree that it is not fit for purpose.  by 'Ballhatchet'   (29 Sep 2010 @ 18:19)
Re: I quite agree that it is not fit for purpose.  by 'drewdt3'   (29 Sep 2010 @ 18:34)
Re: I quite agree that it is not fit for purpose.  by 'Ballhatchet'   (29 Sep 2010 @ 18:46)
Re: I quite agree that it is not fit for purpose.  by 'Jole'   (29 Sep 2010 @ 19:38)
Re: I quite agree that it is not fit for purpose.  by 'philharrison'   (29 Sep 2010 @ 22:58)
Re: I quite agree that it is not fit for purpose.  by 'kartcollector'   (30 Sep 2010 @ 7:25)
Re: I quite agree that it is not fit for purpose.  by 'Jole'   (30 Sep 2010 @ 8:21)
Re: I quite agree that it is not fit for purpose.  by 'philharrison'   (30 Sep 2010 @ 14:10)
Not good enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!  by 'AlfieMoon'   (30 Sep 2010 @ 15:16)
Re: Not good enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!  by 'philharrison'   (30 Sep 2010 @ 16:51)
Re: Not good enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!  by 'Invader'   (30 Sep 2010 @ 17:06)
Re: Not good enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!  by 'richydehav'   (30 Sep 2010 @ 17:03)
Re: Not good enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!  by 'Ballhatchet'   (30 Sep 2010 @ 17:14)
Re: Not good enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!  by 'Jole'   (30 Sep 2010 @ 19:10)
Re: Not good enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!  by 'Ballhatchet'   (30 Sep 2010 @ 21:46)
storm issues  by 'TeamOrange'   (30 Sep 2010 @ 21:55)
Re: storm issues  by 'Ballhatchet'   (30 Sep 2010 @ 23:17)
Re: storm issues  by 'drewdt3'   (01 Oct 2010 @ 9:50)
Re: storm issues  by 'gaz47'   (01 Oct 2010 @ 12:37)
Re: storm issues  by 'drewdt3'   (01 Oct 2010 @ 15:23)
Re: storm issues  by 'lbsf1'   (01 Oct 2010 @ 16:09)
Re: storm issues  by 'drewdt3'   (01 Oct 2010 @ 16:47)
That is not a crack.  by 'AlfieMoon'   (01 Oct 2010 @ 18:02)
Re: storm issues  by 'DavyBoy'   (01 Oct 2010 @ 18:21)
Re: storm issues  by 'Liam'   (02 Oct 2010 @ 1:15)
Re: storm issues  by 'iant'   (07 Oct 2010 @ 16:16)
Re: Intrepid Storm (Cracking issues)  by 'jaiandrews'   (05 Oct 2010 @ 18:58)
Re: Intrepid Storm (Cracking issues)  by 'GR2'   (07 Oct 2010 @ 9:57)

Pulse pipe  by 'Lincoln3'   (27 Sep 2010 @ 23:37)
Re: Pulse pipe  by 'Lincoln3'   (27 Sep 2010 @ 23:49)
Re: Pulse pipe  by 'Liam'   (28 Sep 2010 @ 0:15)
Re: Pulse pipe  by 'huxley'   (28 Sep 2010 @ 23:08)
Re: Pulse pipe  by 'Lincoln3'   (29 Sep 2010 @ 8:16)
Re: Pulse pipe  by 'huxley'   (30 Sep 2010 @ 20:12)
Re: Pulse pipe  by 'Liam'   (30 Sep 2010 @ 20:20)

Minimax FR125 - pre '09 engine  by 'HarryH1997'   (27 Sep 2010 @ 22:58)
Re: Minimax FR125 - pre '09 engine  by 'Cadet49Dad'   (28 Sep 2010 @ 16:25)
If you want an honest opinion speak to......  by 'kelvyn'   (29 Sep 2010 @ 12:12)

Rotax engine - fiched against unfiched  by 'HarryH1997'   (27 Sep 2010 @ 22:30)
Re: Rotax engine - fiched against unfiched  by 'DarrenC'   (28 Sep 2010 @ 14:18)
Re: Rotax engine - fiched against unfiched  by 'DavyBoy'   (28 Sep 2010 @ 15:37)
Re: Rotax engine - fiched against unfiched  by 'HarryH1997'   (28 Sep 2010 @ 21:56)
Re: Rotax engine - fiched against unfiched  by 'lbsf1'   (30 Sep 2010 @ 22:02)
Harry  by 'itpro'   (01 Oct 2010 @ 15:47)
itpro  by 'cadetdadnw'   (01 Oct 2010 @ 19:57)
Re: itpro  by 'itpro'   (03 Oct 2010 @ 14:15)
Re: itpro  by 'Liam'   (07 Oct 2010 @ 0:13)
Re: itpro  by 'itpro'   (07 Oct 2010 @ 0:31)

Basic rotax max Snr jet setup  by 'mattkart'   (27 Sep 2010 @ 20:52)
Re: Basic rotax max Snr jet setup  by 'ijsjs'   (27 Sep 2010 @ 22:36)
Re: Basic rotax max Snr jet setup  by 'Ditch'   (28 Sep 2010 @ 6:30)
Re: Basic rotax max Snr jet setup  by 'Hilts'   (28 Sep 2010 @ 8:57)
Re: Basic rotax max Snr jet setup  by 'RedStripe'   (28 Sep 2010 @ 15:55)
Re: Basic rotax max Snr jet setup  by 'huxley'   (28 Sep 2010 @ 23:20)
Re: Basic rotax max Snr jet setup  by 'kart100'   (29 Sep 2010 @ 15:09)
Thanks for the advise  by 'mattkart'   (29 Sep 2010 @ 18:31)
Re: Thanks for the advise  by 'huxley'   (30 Sep 2010 @ 17:46)
I owe you guys..........  by 'mattkart'   (02 Oct 2010 @ 21:19)

What BHP is a senior Rotax Max engine ?  by 'AstonVillaFC'   (27 Sep 2010 @ 20:49)
Re: What BHP is a senior Rotax Max engine ?  by 'blobslosak'   (27 Sep 2010 @ 20:55)
Re: What BHP is a senior Rotax Max engine ?  by 'AstonVillaFC'   (27 Sep 2010 @ 21:03)
Re: What BHP is a senior Rotax Max engine ?  by 'Ditch'   (28 Sep 2010 @ 6:23)
Minimax BHP ?...also out of interest  by 'Danlee'   (28 Sep 2010 @ 12:07)
Re: What BHP is a senior Rotax Max engine ?  by 'Les'   (28 Sep 2010 @ 12:11)
Re: What BHP is a senior Rotax Max engine ?  by 'Les'   (28 Sep 2010 @ 12:18)
and now torque?  by 'Danlee'   (28 Sep 2010 @ 12:33)
Does the Rotax DD2 still actually race anywhere...  by 'Newshound'   (28 Sep 2010 @ 12:33)
Re: Does the Rotax DD2 still actually race anywher  by 'Les'   (28 Sep 2010 @ 12:47)
Re: What BHP is a senior Rotax Max engine ?  by 'John'   (28 Sep 2010 @ 12:48)
Re: What BHP is a senior Rotax Max engine ?  by 'Les'   (28 Sep 2010 @ 12:57)
Re: What BHP is a senior Rotax Max engine ?  by 'John'   (28 Sep 2010 @ 13:20)

Alfano heat sensor  by 'CharlieCadet'   (27 Sep 2010 @ 19:49)
Re: Alfano heat sensor  by 'AndyOxfordshire'   (27 Sep 2010 @ 20:16)
Re: Alfano heat sensor  by 'Anse'   (27 Sep 2010 @ 20:23)
Re: Alfano heat sensor  by 'CharlieCadet'   (28 Sep 2010 @ 9:24)
Re: Alfano heat sensor  by 'AndyOxfordshire'   (28 Sep 2010 @ 11:03)
Re: Alfano heat sensor  by 'cos22'   (29 Sep 2010 @ 23:56)
Re: Alfano heat sensor  by 'AndyOxfordshire'   (30 Sep 2010 @ 10:03)
Re: Alfano heat sensor  by 'cos22'   (30 Sep 2010 @ 23:28)

new battery time......  by 'ac1962'   (27 Sep 2010 @ 17:07)

Help Jica bump start?  by 'DarrenC'   (27 Sep 2010 @ 11:15)
Re: Help Jica bump start?  by 'Mikekart95'   (27 Sep 2010 @ 11:42)
Re: Help Jica bump start?  by 'davidmc'   (27 Sep 2010 @ 12:24)
Clutch to D/D Conversion Sprocket  by 'Attack2001'   (27 Sep 2010 @ 18:23)

iPhone app for calculating jetting  by 'richardmcculloch69'   (26 Sep 2010 @ 19:14)
Re: iPhone app for calculating jetting  by 'HarryH1997'   (26 Sep 2010 @ 22:08)
Re: iPhone app for calculating jetting  by 'lbsf1'   (27 Sep 2010 @ 18:28)
Re: iPhone app for calculating jetting  by 'John'   (27 Sep 2010 @ 19:35)
Re: iPhone app for calculating jetting  by 'richardmcculloch69'   (27 Sep 2010 @ 20:16)
Re: iPhone app for calculating jetting  by 'John'   (28 Sep 2010 @ 1:04)
Re: iPhone app for calculating jetting  by 'HarryH1997'   (27 Sep 2010 @ 22:11)
Re: iPhone app for calculating jetting  by 'Doink'   (27 Sep 2010 @ 22:23)
Re: iPhone app for calculating jetting  by 'woody10200'   (27 Sep 2010 @ 23:13)
Re: Its.....................................>  by 'NealC'   (28 Sep 2010 @ 11:58)
Re: Its.....................................>  by 'John'   (28 Sep 2010 @ 12:45)
Re: Its.....................................>  by 'NealC'   (28 Sep 2010 @ 17:13)
Re: Its.....................................>  by 'woody10200'   (29 Sep 2010 @ 21:51)
Re: iPhone app for calculating jetting  by 'cos22'   (30 Sep 2010 @ 23:30)
Re: iPhone app for calculating jetting  by 'John'   (01 Oct 2010 @ 7:53)
158 or 160 pin 2 on k98  by 'LiamMurray'   (01 Oct 2010 @ 7:59)

OTK Rear Axle Peg holes  by 'HarryH1997'   (26 Sep 2010 @ 17:14)
Re: OTK Rear Axle Peg holes  by 'AMB'   (26 Sep 2010 @ 18:00)
Re: OTK Rear Axle Peg holes  by 'Attack2001'   (26 Sep 2010 @ 18:36)
Re: OTK Rear Axle Peg holes  by 'HarryH1997'   (26 Sep 2010 @ 22:15)
Re: OTK Rear Axle Peg holes  by 'Attack2001'   (27 Sep 2010 @ 23:12)
Re: OTK Rear Axle Peg holes  by 'huxley'   (30 Sep 2010 @ 17:40)

T.K.M. Engines  by 'spider'   (26 Sep 2010 @ 14:27)
Re: T.K.M. Engines  by 'DINO'   (26 Sep 2010 @ 15:18)
Re: T.K.M. Engines  by 'Liam'   (26 Sep 2010 @ 19:29)
Re: T.K.M. Engines  by 'Volts'   (27 Sep 2010 @ 7:53)
Re: T.K.M. Engines  by 'glittttt'   (27 Sep 2010 @ 20:40)
Re: T.K.M. Engines  by 'Liam'   (28 Sep 2010 @ 0:16)

Rotax Max Crank Movement  by 'mattkart'   (25 Sep 2010 @ 20:26)
Re: Rotax Max Crank Movement  by 'mattkart'   (25 Sep 2010 @ 20:35)
Re: Rotax Max Crank Movement  by 'Liam'   (25 Sep 2010 @ 20:54)
Re: Rotax Max Crank Movement  by 'Ditch'   (26 Sep 2010 @ 3:24)

Alfano max rev  by 'CharlieCadet'   (25 Sep 2010 @ 18:44)
Re: Alfano max rev  by 'Bucky'   (25 Sep 2010 @ 19:05)
Re: Alfano max rev  by 'richardmcculloch69'   (25 Sep 2010 @ 19:56)

Atol and Castrol 2 stroke oil  by 'Attack2001'   (25 Sep 2010 @ 17:04)
Re: Atol and Castrol 2 stroke oil  by 'markmorton'   (29 Sep 2010 @ 13:02)

London cup  by 'scorey'   (23 Sep 2010 @ 23:32)
Re: London cup  by 'lee32'   (24 Sep 2010 @ 8:11)
Re: London cup  by 'AndyWebb'   (24 Sep 2010 @ 15:10)
Re: London cup  by 'scorey'   (24 Sep 2010 @ 22:07)


 
Jump to page : 1 ... 143 144 145 146 - 147 - 148 149 150 151 ... 315 


[ UK Karting Main Index ]


News Karts and Karting Notice Board Market Place Companies Directory Tracks Directory Events Calendar Race Results Photo Gallery Links
News Karts &
Karting
Notice
Board
Market
Place
Companies
Directory
Tracks
Directory
Events
Calendar
Race
Results
Photo
Gallery
Links

UK Karting

Copyright © 1996-2018 UK Karting
Comments, Suggestions etc. mail@karting.co.uk